News&Blog

News&Blog

Home >  News&Blog

PVC Foam Board Glossary Celuka, Forex, Foamex, Sintra, Andy Board and More

Nov 13, 2026

The short answer

The trade name on an enquiry is not a technical specification. Whether a buyer asks for Celuka, Forex, Foamex, Sintra, Andy Board, Chevron Board or Sunboard, every rigid PVC foam sheet is manufactured by one of three extrusion processes (Free Foam, Celuka / Integral Skin, or Co-Extrusion) at a specific density (0.30 to 1.0 g/cm³) and thickness (1 to 30 mm). Ordering by the 5-line technical specification prevents costly container mismatches.

Ask five international suppliers for “PVC foam board” — or send an RFQ naming “Forex,” “Foamex,” “Sintra,” or “Andy Board” — and you may receive five quotations for five completely different materials. One factory quotes a 0.32 g/cm³ free-foam signage sheet; another quotes a 0.60 g/cm³ integral-skin cabinet board. Both suppliers believe they answered your enquiry accurately.

This glossary maps every major trade name, process term and regional nickname in global circulation to the actual extrusion process, density range and application it represents — so your purchasing team can translate any customer request into an unambiguous factory specification.

1. Why One Material Family Has Over Fifteen Names

Rigid expanded PVC sheet is a generic thermoplastic material family, not a single branded product. The terms buyers encounter in technical drawings, tenders and distributor catalogues come from four distinct sources:

  • Extrusion process names — terms that originally described the tooling and foaming method (such as Celuka or Free Foam) and later became shorthand for the board itself.
  • Third-party manufacturer trademarks — proprietary brand names (such as Forex, Sintra, KömaCel, Komatex or Palight) that became genericized everyday nouns in certain regional signage or construction markets.
  • Export and regional trade nicknames — terms born in specific domestic or export trade channels, such as Andy Board (安迪板) and Chevron Board (雪弗板) in China export trade, Foamex in the UK and Ireland, or Sunboard in South Asia.
  • Surface or composite descriptors — terms that describe how the board is finished or reinforced, such as PVC Crust Board, Laminated PVC Board, or WPC (Wood-Plastic Composite) Foam Board.

What the trade name never tells you

Nominal density (g/cm³), thickness tolerance (mm), surface hardness and screw-holding force — the exact physical variables that determine whether the sheet works in UV printing, CNC engraving or kitchen cabinetry.

2. The Three Extrusion Processes Behind Every Trade Name

Regardless of what a distributor calls the sheet, every pure PVC foam board is produced on one of three extrusion lines. Understanding these three cross-sections is the key to decoding the entire glossary.

Article02_Glossary_Fig1_18mm_FreeFoam_Celuka_CoExtrusion.png 

Figure 1. Physical 18 mm cross-section comparison on a factory inspection bench: Free Foam (left, uniform matte white micro-cellular structure), Celuka Integral-Skin (centre, smooth dense white skin over a fine white foam core), and Co-Extrusion (right, smooth high-hardness glossy white top and bottom outer layers bonded to a dark charcoal fine micro-foam core).

2.1 Free Foam (Open-Die / Standard Expanded PVC — Pluswin Series PL-08)

The foaming PVC melt expands freely as it exits the die before passing through calibration rollers, without forming a compressed outer crust. The result is a uniform, fine closed-cell micro-foam with a matte surface and no hard skin. Standard density is 0.30–0.35 g/cm³ in thicknesses from 1 to 20 mm. Best suited for flat UV digital printing, screen printing, exhibition graphics and light CNC lettering. It does not hold hinges, screws or V-grooves reliably.

2.2 Celuka / Integral-Skin Foam (Crust Board — Pluswin Series PL-01)

Developed from the inward-foaming cooled-die process, a calibrated cooling die chills the outer surfaces immediately as the extrudate leaves the die while the interior foams inward. This forms a smooth, dense, hard outer skin encapsulating a fine closed-cell core of the same formulation. Standard density covers 0.40–1.0 g/cm³ in thicknesses from 1 to 30 mm. Ideal for kitchen and bathroom vanities, furniture carcasses, CNC grooving, screw fixing (≥ 850 N under EN 320:2011 at cabinet densities) and thermoforming (100–140 °C).

Article02_Glossary_Fig2_18mm_Extrusion_Calibration_Line.png 

Figure 2. A continuous white PVC Celuka foam board sheet passing through stainless steel vacuum calibration and cooling rollers in the extrusion workshop.

2.3 Co-Extrusion PVC Foam Board (ABA Multi-Layer — Pluswin Series PL-04)

Two extruders feed one multi-manifold die simultaneously, fusing a dedicated high-hardness outer surface layer directly onto a foamed PVC core. Because the surface and core have separate formulations, the outer layer can be optimised for scratch resistance, hardness and weatherability independently of the core. Standard density covers 0.50–0.85 g/cm³ in thicknesses from 3 to 30 mm, available in 3 core colours (white, black, yellow) plus 9 surface colours.

Property

Free Foam (PL-08)

Celuka / Integral Skin (PL-01)

Co-Extrusion (PL-04)

WPC Foam Board (PL-03)

Typical Density

0.30–0.35 g/cm³

0.40–1.0 g/cm³

0.50–0.85 g/cm³

0.50–0.70 g/cm³

Typical Thickness

1–20 mm

1–30 mm

3–30 mm

5–30 mm

Outer Surface

Matte, no dense skin

Smooth integral dense skin

Dedicated rigid co-extruded layer

Dense skin with wood/bamboo fibre

Screw & Hinge Holding

Not recommended

Good to Excellent (0.55–0.75 g/cm³)

Excellent (highest surface hardness)

Excellent (reinforced by plant fibre)

Colour Options

Primarily white

Same colour through skin and core

3 core + 9 surface colours

Natural wood-tone / white substrate

Primary Applications

Signage, UV printing, displays

Cabinets, vanities, millwork

Heavy-duty furniture, two-tone engraving

Cabinetry, door frames, wall panels

3. A-to-Z Glossary of PVC Foam Board Trade Names

Term / Trade Name

Origin / Category

What Buyers Usually Mean

Pluswin Equivalent & Specification Advice

Andy Board (安迪板)

China export & signage nickname

Phonetic transliteration used in export trade for expanded PVC sheet, especially 1–10 mm signage boards

Usually maps to Free Foam (PL-08, 0.30–0.35 g/cm³) for printing, though sometimes used loosely for thin Celuka (PL-01). Always confirm density and skin.

Celuka Board

Extrusion process name

Integral-skin PVC foam board with a smooth, hard outer crust and foamed core

Pluswin PL-01 Celuka PVC Foam Board (1–30 mm, 0.40–1.0 g/cm³). Always specify nominal density (e.g. 0.55 g/cm³).

Chevron Board (雪弗板)

China domestic & export trade name

Used interchangeably with Andy Board for white rigid PVC foam sheets in CNC lettering and displays

Confirm whether the end use is flat signage (PL-08 Free Foam) or structural cabinetry/engraving (PL-01 Celuka).

Co-Extruded PVC Board

Extrusion process name (ABA)

Multi-layer PVC foam board with a dedicated hard surface layer over a foamed core

Pluswin PL-04 Co-Extrusion Board (3–30 mm, 0.50–0.85 g/cm³), 3 core + 9 surface colours.

Crust Board / Skin Foam

Descriptive process term

Direct translation of integral-skin board with a dense surface crust

Pluswin PL-01 Celuka PVC Foam Board.

Expanded PVC (EPVC)

Generic material term

Closed-cell foamed rigid PVC sheet (distinct from solid rigid PVC sheet)

Covers all foamed PVC lines (PL-08, PL-01, PL-04). Require thickness and density to quote.

Foamex

Regional trade name (UK & Ireland)

Used by UK sign makers and exhibition contractors for 3 mm, 5 mm and 10 mm PVC foam sheet

Quote Free Foam (PL-08) for flat printing or mid-density Celuka (PL-01, 0.45–0.50 g/cm³) for smoother skin.

Forex

Registered brand of 3A Composites

Frequently used in European enquiries as shorthand for rigid white PVC foam board

Check whether the buyer needs a lightweight print substrate (0.35–0.45 g/cm³) or structural sheet (0.50–0.70 g/cm³).

Free Foam PVC

Extrusion process name

Open-die expanded PVC foam sheet with a uniform matte surface and no dense outer crust

Pluswin PL-08 Free Foam Board (1–20 mm, 0.30–0.35 g/cm³).

KömaCel

Registered brand of Kömmerling

Integral skin-foam PVC-U sheet with a hard, smooth outer skin

Maps by process to Celuka (PL-01) or Co-Extrusion (PL-04) at 0.55–0.75 g/cm³.

Komatex

Registered brand of Kömmerling

Fine-textured matte-surface free-foam PVC sheet for printing and signage

Maps by process to Free Foam (PL-08).

Laminated PVC Board

Surface-finished product term

PVC or WPC foam substrate factory-laminated with decorative PVC, PET or wood-grain film

Pluswin PL-02 Laminated Board (PUR hot-melt lamination workshop + PL-07 edge banding).

Palight

Registered brand of Palram

Foamed PVC sheet family used across signage, printing and fabrication

Confirm whether free-foam or integral-skin surface is required, then match thickness and density.

Sintra

Registered brand of 3A Composites

Widely used in North America by sign shops and exhibit builders for expanded PVC sheet

Clarify thickness (mm), colour and density (g/cm³) to match router or flatbed printer setup.

Sunboard

Regional trade name (South Asia / ME)

Rigid white PVC foam sheet used for vinyl mounting, POS displays and indoor signage

Typically maps to Free Foam (PL-08) or light Celuka (PL-01) in 2–8 mm thicknesses.

WPC Foam Board

Composite material name

Wood-Plastic Composite foam board blending PVC resin, calcium filler and wood/bamboo fibre

Pluswin PL-03 WPC Foam Board (5–30 mm, 0.50–0.70 g/cm³) for cabinetry, door frames and wall panels.

Trademark disclaimer: Third-party brand names above (including Forex, Sintra, KömaCel, Komatex, Palight and others) are the property of their respective owners and are referenced strictly for editorial and technical identification. Hangzhou Jiaying Trade Co., Ltd. (Pluswin) is not affiliated with, endorsed by, or manufacturing under these third-party brands.

4. Why Density Decodes the Trade Name

Two suppliers can both quote “18 mm Celuka PVC Foam Board” — or “18 mm Andy Board” — at prices that differ by 35%. Neither is necessarily overcharging; they are quoting different densities. Because PVC foam board is sold per sheet while raw material cost scales by weight, density (g/cm³) locks both mechanical performance and container loading math:

Density Band

Pluswin Product Line

Mechanical Behaviour

Recommended Applications

0.30–0.35 g/cm³

PL-08 Free Foam

Lowest weight, most economical per sheet, easy cutting; low screw retention

UV digital printing, screen printing, exhibition graphics, temporary displays, CNC lettering

0.40–0.50 g/cm³

PL-01 Celuka (Mid Range)

Smooth hard skin with light core; good flatness, moderate rigidity

Indoor decorative wall panels, ceiling linings, non-load-bearing partitions, display racks

0.50–0.70 g/cm³

PL-01 Celuka (High) / PL-03 WPC / PL-04 Co-Extrusion

Optimal strength-to-weight balance; passes EN 320:2011 screw holding (≥ 850 N)

Kitchen & bathroom cabinet carcasses, vanity doors, furniture components, hardware-mounting zones

0.70–1.00 g/cm³

PL-01 Celuka (Extra-High) / PL-04 Co-Extrusion

Highest surface hardness and load capacity; heavier sheet weight and faster tool wear

Heavy-duty structural cabinetry, countertop substrates, industrial machined parts

Article02_Glossary_Fig3_18mm_Density_Thickness_Check.png 

Figure 3. Verifying board density and thickness on a factory QC bench: weighing a precision-cut sample block on a balance and checking thickness with a vernier caliper.

5. How to Replace Trade Names with a 5-Line Purchase Specification

To eliminate ambiguity across languages and regional trade habits, replace brand nicknames in your RFQ and Proforma Invoice (PI) with this five-line specification:

  • Process & Product Line — State Free Foam (PL-08), Celuka Integral-Skin (PL-01), Co-Extrusion (PL-04), WPC (PL-03) or PUR Laminated (PL-02).
  • Nominal Density & Tolerance — Specify exact density in g/cm³ with an agreed tolerance (e.g. 0.55 g/cm³ ± 0.02 g/cm³).
  • Thickness & Tolerance — Specify nominal thickness in mm and write the thickness tolerance into the PI.
  • Sheet Dimensions & Colour — Standard 1220 × 2440 mm (4 × 8 ft) or custom cut-to-length; specify white, core/surface colour combination or Pantone reference.
  • End-Use Application — State whether the board will be UV-printed, CNC-engraved, thermoformed or assembled with cabinet hinges and screws.

6. Frequently Asked Questions

What is the difference between Andy Board, Chevron Board and Celuka PVC board?

In Chinese export trade, “Andy Board” (安迪板) and “Chevron Board” (雪弗板) are informal trade nicknames for expanded PVC foam sheets — most often referring to lightweight 0.30–0.35 g/cm³ free-foam signage sheets, though some traders apply the words to any white PVC foam board. “Celuka” is a specific extrusion process (PL-01) that forms a dense, smooth outer skin (0.40–1.0 g/cm³) suitable for cabinetry and screw fixing. Always specify process and density rather than relying on nicknames.

Is Forex or Sintra the same thing as Celuka PVC foam board?

No. Forex and Sintra are proprietary third-party brand names that many buyers use generically to mean expanded PVC sheet, whereas Celuka describes the cooled-die integral-skin extrusion process. When a customer asks for “Forex” or “Sintra,” check their thickness (mm), target density (g/cm³), and whether they need a matte free-foam print surface (PL-08) or a hard integral skin (PL-01).

How can I check whether a delivered container matches the density I paid for?

Cut a rectangular sample piece cleanly, measure its length, width and thickness with a digital caliper to calculate volume in cm³, and weigh the piece on a gram scale (Density = Weight in grams ÷ Volume in cm³). Also inspect the saw-cut edge: a Celuka or co-extruded board has a visibly dense outer skin surrounding a fine, uniform closed-cell core.

Can Pluswin match a competitor’s sample if I only know its local trade name?

Yes. You can either send us the five-line specification above or courier a small physical cut-off of the board you are currently buying. Our QC lab will measure its exact process structure, density, thickness, hardness and colour, and quote the matching Pluswin specification (0.30 to 1.0 g/cm³).

Send Us the Trade Name — We Will Translate It Into a Specification

Holding a quotation or tender with a regional trade name?

Send us the trade name, thickness, sheet size, application and target quantity (or a physical sample). Our engineering and export team will confirm the exact extrusion process, recommended density band and container loading count for your market.

Hangzhou Jiaying Trade Co., Ltd. (Pluswin) — Manufacturer of Celuka, Free Foam, Co-Extrusion, WPC, Laminated, Marble UV and Wall Panel products since 2006 · Hangzhou, Zhejiang, China · Exporting to 96 countries.